Mor Electric Heating Logo

InfraredHeaters.com

Questions? 1-800-442-2581
8:00am-5:00pm M-F (Eastern Time)

Shopping cartShopping Cart

Our secure online ordering website: www.MorElectricHeating.com.
Our other websites: www.HeatersPlus.com and www.Fans-Plus.com.


Home | Products | Accessories | Ordering | Contact Us | Search

Metal Infrared Heaters

  Fostoria HDO 120 - 600 volts.  Metal sheath elements. Fostoria Heavy Duty Infrared Heaters are for use in factories, warehouses, maintenance areas, machine shops and any application that exposes the fixture to shock and vibration. Fostoria's u-shaped metal sheath elements are stable and more shock resistant than quartz lamps or tubes.

Qmark Type BRM 240-600 Volts. Heaters can be suspended just like fluorescent lighting fixtures to focus heat where desired. Designed for heavy duty spot heating or total heating applications. Heavy duty metal sheath heating elements. Can be operated indoors or out. Heater can be washed down

Qmark Type CRN overhead comfort washdown. 120-240 Volts. Minimum mounting height: 10 feet. Heater can be washed down after being disconnected.  90 degree symmetrical reflector. Metal sheathed tubular heating element. Optional accessory wire guard.   Open Coil Elements. Coiled nichrome and kanthal wire. Resistance wire open coil elements are used in vacuum forming / thermoforming. Cut to length needed.
Blasdel COR Coil-O-Rod Generators. Powder coating, baked enamels, moisture dry off, softening plastics for compression molding or vacuum forming, degreasing, etc. Exceptionally long service life. On average, one can expect about 10,000 hours, however much longer is not uncommon. 10 Foot NiCr Open Coils. Unstretched Lengths of NiCr 60 Coiled Elements. 17-22 gage. Nichrome resistance wire elements used in convection heating, R&D, duct heaters, portable heaters and air process heaters, vacuum forming / thermoforming. Stretch at least twice as long (20 feet) (2-1 ratio) before using.  Cut to length needed. Tightly wound coils. 1/4" approximate inside diameter.
Qmark type ARL roll around comfort portable 240-480 Volts. Portable - Mounted on two-wheeled carts for ease of movement to areas that are hard to heat. Economical answer to warm workmen, thaw frozen equipment or heat loading dock areas where permanent installed heaters are not practical. Heavy duty metal sheath tubular heating elements. Weatherproof - For indoor or outdoor use. Heater can be washed down. Safety Screen standard. 25-foot optional accessory cord sets available. Chromalox ChromaStar Infra-Red Radiant Heaters. 1.5 to 13.5 kW, 120, 208, 240, 277, 480, and 600 Volts, Fixed Overhead - Convertible to Portable  Model#: STAR-02-11-PC Includes 6 foot cord and 2-prong grounding type plug. Localized heating in large plants, Loading Docks, Narrow warehouse aisle heating, Garages, Dry paint , Prevent freezing of pipes, valves , Heat hoppers
  Chromalox Type SKR Comfort Heating Assemblies 0.8 - 3.6 kW, 120, 208, 240, 275 and 480 Volt, Protective Grille, comfort heat in indoor and protected outdoor locations. Qmark Type FRP/FRS 2 or 3 Element fixture Total or supplement (spot) heating in commercial and industrial areas, assembly lines, aircraft hangers, outside smoking areas, work stations and shipping areas.  Snow melting for waiting areas and entryways, stairs, parking lots, driveways and loading docks, smoking areas.
Chromalox Metaray Type FR and FRR Edison Base Spot Heaters. (375 - 500 Watt Lamp Replacement). 120 Volt, Replaces G-30 lamps and R-40 lamps. Spot Heating, Asphalt and Vinyl Tile Glue Softening, Thawing, Touch-Up Paint Curing Chromalox Metaray Type DQ Direct Wire Spot Heaters. (1,000 Watt Ceramic Replacement) (375 - 500 Watt Lamp Replacement). 120 Volt,  Spot Heating, Asphalt and Vinyl Tile Glue Softening, Thawing, Touch-Up Paint Curing
Fostoria U-Shaped Replacement Elements.  .430" diameter Inconel metal sheath. Available wattages: 1800 to 4500W. Available voltages: 120 to 600V   Chromalox Type RTU Replacement Elements 3/8" Dia. Heart Cross-Section. INCOLOY® Sheath. 400 - 6,500 Watts. 120, 208, 240, 275 and 480 Volt 1600°F Max. Sheath Temp.
Type RAD Industrial Heaters 0.40 to 4.5 kW. One metal sheathed tubular heating element in a housing assembly available in lengths between 13 5/8" and 106" Width is 3 11/16" Type DU-RAD (Single element double hairpin) 1.6 - 7.83 kW, 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY ® Sheath Elements (type UTU), 1500°F Max. Sheath Temp.
Type RADD (two element)  1.6 - 13 kW, 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY® Sheath Elements (type RTU), 1500°F Max. Sheath Temp. Type FW Food Warmers (Single Element) 0.5 - 1.05 kW.   120, 208 and 240 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1250°F Max. Sheath Temp., Use where cooked food is placed for pickup to maintain serving temperatures.
Type U-RAD (one or two element) 0.80 to 7.2 kW Metal Tubular Element Industrial Reflector Assemblies. 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY® Sheath Elements,  1500°F Max. Sheath Temp. Type U-RP - mounted on channels (3-6 elements) 13.2 - 36 kW , 208, 240, 275 and 480 Volt,  3/8" Dia. INCOLOY ® Sheath Elements, 1500°F Max. Sheath Temp.
Type RAD-H Hermetically Sealed for Humid Areas (Single Element) 0.7 - 3.6 kW., 120 and 240 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1000°F Max. Sheath Temp., For Humid Area Environments, Rubber and Synthetic Fabric Processing, Meat and Food Processing Type LN and LW Oven Modular Sections (Single Metal or Quartz Element) 0.45 - 3.8 kW. , 120, 208, 240, 480 and 600 Volt, 6" Wide Section (type LN) or 12" Wide Section (type LW)
Type S-RAD (Single Element) 0.95 - 4.4 kW., 120, 208, 240 and 275 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1500°F Max. Sheath Temp. For Resin Curing, Thermoforming, Equipment Packaging, Mirror Manufacturing, Rubber Curing, etc. Type RUTU (Single Hairpin Element) 0.8 - 3.6 kW., 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1500°F Max. Sheath Temp., High Intensity Applications, Fast-Moving Webs and other applications where high temperatures will not damage materials
Chromalox U-RAD-LT Liquid Tight Sealed Reflector Assemblies. One or two U-shaped metal sheathed tubular heating elements available in lengths between 13 5/16"  and 87 1/4". The special protective terminal cover provides liquid tight protection to terminals. 3/8" diameter Incoloy® sheath elements. 120, 208, 240, 275, 480 Volts Chromalox Type KR Spot Heating Assembly. Plug-in Single Fixed Element Radiant Heater. Comfort heat in indoor and protected outdoor locations. Ceiling mounted by chains, steel strap or other means. 0.8 - 1.8 kW, 120, 208 and 240 Volt , Protective Grille

Chromalox® is a registered trademark.

Home ] Up ] Chromalox Metal Sheathed Tubular Industrial Reflector Assemblies ] Open Coil Metal Elements ] Fostoria Metal Tubular Replacement Elements ] Fostoria Heavy Duty Comfort Heaters ] Fostoria Portable Comfort Heaters ] Qmark Type ARL Rollaround Heaters ] Qmark Type BRM heavy duty suspended spot heater ] Qmark Type CRN suspended spot heater ] Qmark Fahrenheat Deluxe Type MCM Fan Forced/Radiant Utility Heater ] Blasdel Enterprises COR Coil-O-Rod Generators ]


We are a distributor of infrared heaters. Always consult manufacturers installation instructions for proper installation of the products or systems shown on this website. © Copyright 1999-2019 Mor Electric Heating Assoc., Inc.

MOR ELECTRIC HEATING ASSOC., INC.
5880 Alpine Ave. NW - Comstock Park, MI 49321  USA
Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775
E-mail: sales@infraredheaters.com

   follow our blog   Find us on FaceBook   watch our youtube channel   Follow us on Twitter