Quartz Twin Tubes and Accessories

Quartz Tube Elements
Fostoria Quartz Tube Elements
Twin Tube Mounting Hardware, Frames and Accessories

Twin tube medium wave infrared emitters offer a very high infrared emission, coupled with a fast heating and cooling response time. The twin-tube figure-8 cross-section allows emitter lengths up to 150" (3.81 m.) These emitters are available with and without an internal gold reflector. Wiring terminations are on both ends or one end only for low wiring and maintenance costs.  They are designed with a figure eight profile cross section for these and other benefits.

	The emitters are available in the following two different cross section sizes:
	a x b dimensions:	Tolerance of a:	Tolerance of b:
	0.43" x 0.87" 11 x 22 mm	+/- 0.0276" +/- 0.7 mm	+/- 0.0591" +/- 1.5 mm
	0.59" x 1.18" 15 x 30 mm	+/- 0.0394" +/- 1 mm	+/- 0.0788" +/- 2 mm

Watt density is 65 watts/lineal inch maximum with gold reflector
Watt density is 120 watts/lineal inch maximum without gold reflector

Part #: Contact Us

Mounting Hardware, Frames and Accessories for Quartz Twin Tubes:

Single Tube Infrared Emitter End Caps and Other Assembly Components
Infrared Emitter Housings and Modules
Control Panel and Hardware
Laser Gold - Coated Reflectors
Single Bore Clear Fused Quartz Tubing

Part #'s: Contact Us

[ Home ] [ Up ]

	MOR ELECTRIC HEATING ASSOC., INC. 5880 Alpine Ave. NW - Comstock Park, MI 49321  USA Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775 - E-mail: sales@infraredheaters.com © Copyright 1999-2010 Mor Electric Heating Assoc., Inc.