Infrared Heaters for Thermoforming / Vacuum Forming

	Salamander Ceramic Heaters. Individual elements are 96% infrared energy efficient with a maximum temperature of 1292ºF. Standard voltages are 120, 220, 230, 240 and 480 and standard wattages range between 150 and 1000.		CRP. (Ceramic Radiant Panel) Our 12" x 12" stainless steel modular reflector panel with 3 LTE size ceramic heaters for a modular building block design or as a stand alone unit and can be mounted on angle iron gridwork.
	ALEX. Aluminum extrusion housing case pre-wired for 1-5 FTE type ceramic heaters. The reflector is polished stainless steel. Can be mounted in any direction, or side by side to make a larger panel.		Solar Products FBA-Series. Similar to the F-Series heater, with holes drilled in the heater face to allow for forced airflow through the heater. The purpose of the airflow is to provide combination infrared/convection heating. The heater can be as wide as 24" (610mm) and as long as 72" (1829mm), though not this wide and long in the same heater.
	Solar Products F-Series. Industry standard in thermoforming and can be used in most other process heating applications.		Solar Products Q-Series. As wide as 12" (305mm) and as long as 24" (610mm). The QP model has a maximum watt density of 40 wsi (62 kw/m2). The QH model has a maximum watt density of 60 wsi (93 kw/m2).
	Solar Products M, G, K Series. The G-Series heaters have also become an industry standard in thermoforming. The M-Series heaters, with a hard-coated aluminum face has increased durability of a metal face that is often required in the thermoforming industry.		Chromalox CP Panel Heaters. Flat-Faced Wide Area Radiant Panel Heaters. Woven refractory cloth with a black ceramic coating on the front. 0.55 - 18 kW. 120, 230, 240 and 480 Volt. 1650°F Max. Emitter Temperature. 6 - 60" Long x 12 - 30" Wide, Ink Drying and Spot Curing for Printing and Silk Screening, Thermoforming and Vacuum Forming or Wherever Close Maximum Heat is Required
	Chromalox CPHI. High Intensity Quartz Flat-Faced Wide Area Radiant Panel Heater. High Intensity Quartz Faced Radiant Heater, 1.6 - 4.8 kW, 240 and 480 Volt, 1750°F Max. Emitter Temp., 10" Long x 4 - 12" Wide. Moisture Removal, Soften Plastics prior to Thermoforming or Wherever Close Maximum Heat is Required		Chromalox QR Quartz Lamp Industrial Heaters. Aluminum housing containing a highly polished aluminum parabolic reflector. High temperature 3/8" diameter quartz lamp assembly available up to 45 15/16" in length. 120, 208, 240, 480, 600 Volts, 0.5 - 3.8 kW, 4000°F (2204°C) max. source temperature
	Quartz Tubes. Medium wave infrared tubes. Heat-up time in 30-60 seconds, and cool-down time is 15 seconds. Coiled nichrome wire inside of a quartz tube. 3/8", 1/2" and 5/8" diameters. Quartz tube source temperature to 1600°F		Quartz Tube Heater Assemblies. Medium wave heaters (Same size as ceramic heaters.) Quartz tubes running parallel to each other within a highly reflective aluminized steel housing. Watt densities up to 30 w/sq. inch are available. Small in size, and can easily be put in larger panels.
	Fostoria Quartz T-3 Lamp Replacement Elements. 3/8" diameter clear or red quartz envelope. Pigtail lead wires are approx. 6" length.		Fostoria Quartz Tube Replacement Elements Translucent quartz as the enclosure. 5/8" diameter clear quartz envelope Nickel-chrome alloy coiled element.
	Blasdel Ceramic Generators. Ideal for wood, plastic, and other low temperature substrates. The durable nichrome wire wound around a ceramic core is embedded in ceramic material and fired in a kiln.		Quartz T3 Lamps. High intensity short wave infrared lamps. 3/8" diameter clear quartz lamp sheath, Standard 5.7" flexible lead wires, Short-wave infrared radiation with a temperature up to 4,000°F. Sealed quartz tube with an internal tungsten element.
	Blasdel COR Coil-O-Rod Generators. Powder coating, baked enamels, moisture dry off, softening plastics for compression molding or vacuum forming, degreasing, etc. Exceptionally long service life. On average, one can expect about 10,000 hours, however much longer is not uncommon.		Open Coil Elements. Coiled nichrome metal wire. Resistance wire open coil elements are used in vacuum forming / thermoforming. Cut to length needed.
	Chromalox Type RAD. 0.40 to 4.5 kW. One metal sheathed tubular heating element in a housing assembly available in lengths between 13 5/8" and 106" Width is 3 11/16"		Type RADD (two element) 1.6 - 13 kW, 120, 208, 240, 275 and 480 Volt, 3/8" Dia. INCOLOY® Sheath Elements (type RTU), 1500°F Max. Sheath Temp.
	Chromalox Type S-RAD. (Single Element) 0.95 - 4.4 kW., 120, 208, 240 and 275 Volt, 3/8" Dia. INCOLOY Sheath Elements, 1500°F Max. Sheath Temp. For Resin Curing, Thermoforming, Equipment Packaging, Mirror Manufacturing, Rubber Curing, etc.		Fostoria U-Shaped Metal Replacement Elements. .430" diameter Inconel metal sheath. Available wattages: 1800 to 4500W. Available voltages: 120 to 600V
	Chromalox Type RTU Replacement Elements 3/8" Dia. Heart Cross-Section. INCOLOY® Sheath. 400 - 6,500 Watts. 120, 208, 240, 275 and 480 Volt 1600°F Max. Sheath Temp.		Mor Quartz Tube Aluminum Extrusion Panels. 3¾” Wide x 24, 36, 48, 60 or 72" Long. Rigid extruded aluminum housing protects element from harsh industrial environments. Complete, Ready-To-Connect Assembly.
	Black Star Ceramic Strip Heater. Can be used as an infrared heater up to 1000°F for Thermoforming. 1/4"-5/16"-3/8" thickness. Up to 45 watts/square inch. Minimum 4" up to any practical length		Mor Quartz Tube Radiant Panels Reflectors are stainless steel, panels are fully insulated and pre-wired to your specifications. 4, 12, 18 or 30" wide x 24, 36, 48, 60 or 72" Long
	Chromalox QR Quartz Lamp Industrial Heaters. Aluminum housing containing a highly polished aluminum parabolic reflector. High temperature 3/8" diameter quartz lamp assembly available up to 45 15/16" in length. 120, 208, 240, 480, 600 Volts, 0.5 - 3.8 kW, 4000°F (2204°C) max. source temperature


	MOR ELECTRIC HEATING ASSOC., INC. 5880 Alpine Ave. NW - Comstock Park, MI 49321 USA Tel 616-784-1121 - 800-442-2581 - Fax 616-784-7775 - E-mail: sales@infraredheaters.com © Copyright 1999-2010 Mor Electric Heating Assoc., Inc.